Line-interactive tolerates continuous undervoltage, overvoltage and surges without consuming the battery power, and offers increased energy efficiency. The output waveform is a sine-wave with very low harmonic distortion and clear power. Pure sine wave output makes inductive loads run faster, quieter and cooler, generates less electrical noise in equipment and appliances, prevents crashes in computer and glitches in monitors, make these equipment last longer.

Faster and more accurate processing of data

ArcPure UPS provides stable power to connected devices in unstable power conditions.
It has built-in automatic voltage regulator, safety running in a wide voltage range, reduces the using of battery, prolongs the life of battery, especially suitable for power fluctuation or poor power areas, supplying clean power in extreme circumstances.

ArcPure UPS uses Line Interactive technology with pure sine wave output. It ensures superior protection against mains power disturbances, such as surges protection, overvoltage, undervoltage, as well as built-in short circuit and overload protection.

In the absence of any AC input, the cold start function allows users to start UPS with batteries, and without any damage to them or the circuits. Users can easily configure the UPS, even if no AC input is available.

ArcPure system can automatically track the mains phase, to ensure that the inverter output voltage and mains voltage are identical, decrease the transfer time and surge voltage, minimize the interference to electrical equipment.

ArcPure UPS uses frequency adaptive technology. When UPS connect to mains with frequency 50HZ or 60HZ, the system will detect the frequency of mains power, and the output frequency will be the same as the detected frequency even when the mains power fails.

• ArcPure series UPS adopt interactive Design. When mains power is connected, ArcPure system will automatically charging the battery, even the UPS is OFF, to ensure the battery have enough power. When the mains power fails, Aide system will automatically switch to battery mode to provide sufficient runtime for the load saving data and safety shutdown.
• In order to meet continuity applications requiring long battery runtimes, ArcPure UPS features adjustable charging current and adjustable low battery shutdown point to extend battery life.
• ArcPure UPS also be featured with battery temperature compensation to extend the battery life, three-stage charging to shorten recharge time and battery overcharge / over-discharge protections as well.

• When the mains power is restored after discharge of the batteries, ArcPure UPS will automatically restart and self-diagnose to ensure the functionality of the UPS system and batteries.
• ArcPure system can detect load and automatically shut down in the no-load state (Optional). When the load is less than 5%, the system detects that it is under idling/no-load state, it will automatically shut down in about one minute, reduce losses, effectively extending the life of batteries.

ArcPure LCD model have a backlit LCD display for users to observe the UPS status information, load and battery performance.

Standard USB+RJ45, optional USB+RS232, AS400 / SNMP communication ports

• More customized functions.
• Settable battery discharge and low-voltage test. Through this function users can easily see batteries in good or bad condition.
• Timing boot/shutdown for UPS is available.
• Unattended Safe Shutdown by software. AWP Software is able to intelligently save the data and automatically shut down the sever or computer when a power failure occurs. This software allows the UPS to instruct the operating systems to close down a PC when it is running unattended. Users can set the parameters with which to schedule when the computer or server should shutdown, making sure that no significant data is lost and important backups are created.